Abstract
Laser coating (laser cladding) is a useful method to produce metal matrix composite (MMC) coatings. The selection of the metallic matrix can be done on the base of the intended application and environment, whereas the additional wear resistance improvement is provided by mixing various carbides with the metallic matrix. In the present work, various types of MMC coatings were prepared by laser coating methods. The coatings consisted of vanadium, tungsten, titanium and chromium carbide hard phases mixed with metallic tool steel M2, Stellite 21, NiCrBSi-alloy and Inconel 625. Different levels of carbide contents were used. The abrasion resistance of the MMC coatings has been tested using a rubber-wheel abrasion apparatus. The wear surfaces were examined and the microstructures of MMC coatings were analysed in order to determine microstructures and carbide dissolution. The best abrasion results were achieved by the correct choice of carbide for each matrix material.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: International Journal of Refractory Metals and Hard Materials
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.