Abstract
Lead zirconate titanate (PZT)-based ceramics are used in numerous advanced applications, including sensors, displays, actuators, resonators, chips; however, the poor mechanical characteristics of these materials severely limits their utility in composite materials. To address this issue, we herein fabricate transgranular type PZT ceramic nanocomposites by a novel method. Thermodynamically metastable single perovskite-type Pb0.99(Zr0.52+xTi0.48)0.98Nb0.02O3+1.96x powders are prepared from a citrate precursor before both monoclinic and tetragonal ZrO2 nanoparticles ranging from 20 to 80 nm are precipitated in situ at a sintering temperature of 1260 °C. The effects of ZrO2 content on the microstructure, dielectric, and piezoelectric properties are investigated and the mechanism, by which ZrO2 toughened PZT is analyzed in detail. The ZrO2 nanoparticles underwent a tetragonal to monoclinic phase transition upon cooling. The fracture mode changed from intergranular to transgranular with increasing ZrO2 content. The incorporation of ZrO2 nanoparticles improved the mechanical and piezoelectric properties. The optimized piezoelectric properties (εT33/ε0 = 1398, tan δ = 0.024 d33 = 354 pC N−1, kp = 0.66 Qm = 78) are obtained when x = 0.02. Tc initially increased and subsequently decreased with increasing ZrO2 content. The highest Tc = (387 °C) and lowest εT33/ε0 was obtained at x = 0.01.
Highlights
Lead zirconate titanate (PZT)-based ceramics are commonly used in a wide variety of applications, including transformers, transducers, speakers, electric resonators, filters, memory chips, and tactile displays, among others. [1]
Fluctuations and inhomogeneity in the chemical composition of the PZT powder are often observed owing to the presence of small amounts of intermediate phase PT or PZ, which impact the electrical properties of the PZT ceramic
Fluctuations and inhomogeneity in the chemical composition of the PZT powder are often observed owing to the presence of small amounts of intermedi‐ ate phase PT or PZ, which impact the electrical properties of the PZT ceramic
Summary
Lead zirconate titanate (PZT)-based ceramics are commonly used in a wide variety of applications, including transformers, transducers, speakers, electric resonators, filters, memory chips, and tactile displays, among others. [1]. In the past few years, several secondary phases have been added to PZT-based ceramics to improve their mechanical properties by adding a secondary phase These phases can be classified into three types: (1) metal particles such as Ag [4]; (2) fiber-like materials including ZrO2 fibers [5,6] and SiC whiskers [7]; (3) oxide particles such as ZrO2 [8,9], CuO [3], Bi4Ti3O12, [10] and ZnO [11]. The role of residual stress and other possible reinforcement mechanisms on the mechanical responses of the nanocomposites was studied
Sign-in/Register to view highlights & summary Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
