Abstract
For 0.95(Na0.5K0.5)NbO3–0.05BaTiO3 (0.95NKN-0.05BT) ceramics sintered at 1040–1075°C, abnormal grain growth occurred but the grain size decreased when the sintering temperature exceeded 1075°C. The dielectric constant (ϵ3T∕ϵ3), electromechanical coupling factor (kp), and piezoelectric constant (d33) were considerably increased with increasing relative density and grain size. Evaporation of Na2O deteriorated the piezoelectric properties by decreasing the resistivity. To minimize Na2O evaporation, specimens were muffled with 0.95NKN-0.05BT powders during the sintering. Improved piezoelectric properties of d33=225pC∕N, kp=36%, and ϵ3T∕ϵ3=1058 were obtained for specimen sintered at 1060°C for 2h with muffling.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
