Microstructure and mechanical property correlations in AA 6061 aluminium alloy friction stir welds

Abstract

The influence of friction stir welding on the microstructure development and its role on residual stress distribution in the weldment and mechanical properties has been investigated. The study also focused on the impact of post weld heat treatment on the microstructure and mechanical properties as well as on residual stress distribution. The weld nugget region contained fine equiaxed grains as a result of thermo-mechanical working. Hardness survey showed that nugget region is soft due to precipitates dissolution. Weld joint exhibited lower strength as compared to the parent metal. Post weld Solution Treatment and Aging (STA) of longitudinal welds resulted in strength and ductility equivalent to that of parent metal while transverse weld tensile strength and ductility were lower than that of parent metal even after post weld STA. Residual stress distribution profiles across the weld region are asymmetric with respect to weld centerline, with the largest residual; stress gradients occurring on the advancing side of the weld. Within the region inside the shoulder diameter, residual stress is entirely compressive. Welds exhibited tensile residual stresses in post weld STA condition