Abstract
CMT bonding process were done on the 2 plates of 5 mm thick AA6061-T6 alloy by means of ER 4043 wire-electrode of Φ1.2 mm as the filler metal. This study concentrates the impact of a PWHT on the micro-structural and mechanical characteristics of an AA6061-T6 alloy specimen bonded by means of GMAW and by CMT. The welded samples here separated as as-welded and PWHT samples. The ASTM standard E8M-04 was used for cutting all samples in order to get the tensile strength and to measure the bonded joint elongation. The hardness across the bonded joints was measured by using Vickers micro-hardness testing setup. Scanned electron microscopy (SEM) is employed to analyse failure pattern of tensile test performed specimens.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: International Journal of Innovative Technology and Exploring Engineering
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.