Abstract
The tungsten inert gas welding–brazing process using Al-based filler metal has been developed for joining 5052 Al alloy to Ti–6Al–4V alloy in a butt configuration. The results indicated that heat input influenced the morphology and thickness of the interfacial reaction layer of Al/Ti joints, which played an important role in the mechanical properties of weldment. With the optimised tungsten electrode offset D of 1.0 mm from Al/Ti initial interface to Al side and welding current of 70 A, the thin cellular-shaped and club-shaped TiAl3 reaction layers formed in the brazing zone, which contributed to suppressing crack initiation and propagation during tensile test. Eventually, the maximum tensile strength of 183 MPa was obtained and the optimised Al/Ti joint fractured at Al alloy base plate. Moreover, the power density characterisation and joining mechanism of Al/Ti joints were discussed.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call