Microstructure and mechanical properties of the TiZrNbMoTa refractory high-entropy alloy produced by mechanical alloying and spark plasma sintering

Abstract

The equiatomic refractory high entropy alloy (HEA) TiZrNbMoTa was investigated. The alloyed powders with face-centered cubic (FCC) structured solid solution phase were prepared by mechanical alloying (MA) and then sintered by spark plasma sintering (SPS) at 1300, 1400, 1500, and 1600 °C. The microstructure and mechanical properties of the bulk alloy were investigated. The body-centered cubic (BCC) structured solid solution phase and the ZrO2 phase precipitated from the FCC structured solid solution phase during cool-down from sintering. The highest compression fracture strength (3759 MPa) and fracture strain (12.1%) were obtained in the refractory HEA sintered at 1400 °C. The grain boundary strengthening, precipitation strengthening, solid solution strengthening, transformation-induced plastic (TRIP) effect, and toughening effect of the ZrO2 phase are the important factors for the high strength and ducitily of the refractory HEA prepared in this study.