Microstructure and its development in Cu-Al-Ni alloys

Abstract

The microstructure of as-cast Cu-AI-Ni alloys, based on copper containing 9 to 10 wt pct Al and up to 5 wt pct Ni, has been examined. The development of the microstructure on continuous cooling has also been investigated. For alloys with 9.2 to 9.3 wt pct Al, and less than 1 wt pct Ni, the as-cast microstructure consists of proeutectoid α solid solution, α + γ2 eutectoid, and martensitic β. If the nickel content is more than 2.5 wt pct, the α + γ2 eutectoid is replaced by α + β 2 ′ eutectoid, and no martensitic β is observed in the as-cast alloys. The morphologies of the β 2 ′ and γ2 eutectoid phases are similar; both have the Kurdjumov-Sachs (K-S) orientation relationship with the a phase. Two eutectoid reactions, involving β to α + γ2 and β to α + β′2, have been observed in an alloy containing 9.7 wt pct Al and 2.7 wt pct Ni. When both eutectoid reactions occur, the Nishiyama-Wassermann (N-W) orientation relationship exists between γ2 or β 2 ′ and the α phase. During continuous cooling, proeutectoid α solid solution is the first phase to precipitate from the high-temperature β phase. The β to α + β 2 ′ eutectoid reaction starts at higher temperatures than the β to α + γ2 reaction. Tempering of the as-cast alloys results in the elimination of the martensitic β.