Abstract
AbstractA better physical understanding of mesoscale and microscale mechanisms behind deformation and failure of paperboard material is important to optimize industrial packaging converting processes and decrease waste. In this study, these mechanisms were investigated using synchrotron X‐ray tomography during in situ continuous uniaxial tensile loading. High spatial and temporal data resolution enabled quantification of rapid changes in the material occurring before, during and after material failure. The evolution of 3D strain fields, fibre orientations and sample thickness showed that deformation and failure mechanisms differ significantly between samples tested in machine direction (MD), cross direction (CD) and 45° from the loading direction. In 45° and CD, gradual failure processes could be followed across several load steps. Immediately after failure, the in‐plane fracture region was significantly larger in both 45° and CD compared to MD. Both fracture characteristics and strain field distributions differed between the three material directions. Significant fibre reorientation was an active deformation mechanism in 45° already from the beginning of the loading, also present in CD after peak load but absent in MD. The MD‐dependent mechanisms interpreted and quantified at the scale of the fibre network in this study can help guide model development and likely have wider applicability to other paper‐based materials.
Published Version (
Free)
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
