Abstract
Because of their desirable characteristics, for example small size, lightness, low power and gas consumption, and potential for portability, miniaturized plasma sources are receiving significant attention in the scientific literature. To take advantage of these characteristics we micromachined and fabricated new, planar-geometry, self-igniting, atmospheric-pressure microplasma devices (MPDs) on chips. These microplasmas required such low power for their operation they could be operated from a re-chargeable battery (of the type used in cordless power-tools). Despite their advantages, most miniaturized plasma sources reported in the literature have not performed well with liquid samples; analysis of powders or solids that can be converted to a powder (and processed and used as slurries) is even more difficult. To address these shortcomings we coupled an electrothermal, mini-in-torch vaporization (mini-ITV) "dry" sample-introduction system to the low-power planar microplasma devices we developed. In this preliminary investigation, absolute detection limits obtained from microsamples of single-element liquid standards and optical emission spectrometry with photomultiplier-tube detection and a spectral bandpass similar to that of portable, commercially available fiber-optic spectrometers were in the low-pg to ng range, for example 2 pg (for K) to 25 ng (for Pb). Mini-ITV also enabled (as far as we are aware, for the first time) measurement of analyte emission from microsamples of powdered solids (as slurries). In addition to the 3% H2 in Ar mixtures, the ac-operated microplasmas were sustained by use of a variety of electrode materials and different plasma-support gases (e.g. Ar, He and 3% H2 in He) thus indicating fabrication versatility and operational flexibility. Such flexibility has the potential to enable microplasmas to be tailored to analytical problems, and this is demonstrated by using a He MPD and chlorine emission measurements (837.594 nm) from gaseous microsamples as an example.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have