Abstract
In this study, a novel route was proposed for microalgae biofuel production by catalytic upgrading of Chlorella hydrothermal liquefaction (HTL) derived biocrude. Al-SBA-15, CuO/Al-SBA-15, ZuO/Al-SBA-15, and CuO-ZnO/Al-SBA-15 catalysts were synthesized in a facile, one-pot way, and tested for methyl palmitate decarboxylation and biocrude upgrading without H2 addition. These modified SBA-15 catalysts enhanced alkane selectivity of methyl palmitate decarboxylation from 7.6 wt% up to 79.6 wt% at 340–350 °C. FT-IR, TG and GC–MS characterizations were employed to identify the composition and properties of the upgraded bio-oils. Compared with thermal upgrading, modified SBA-15 catalysts enriched the yield of low boiling point compounds, and the content of heavy bio-oil (>400 °C) declined from 9.57 wt% to 1.89 wt%. Hydrocarbon yield was greatly enriched on the catalysts, and aromatics predominant on Al-SBA-15 while aliphatics abundant on metal oxide(s) supported catalysts. The hydrocarbon yield was increased from 25.1 wt% (thermal) to 65.7 wt% on the CuO/Al-SBA-15.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.