Abstract

Purpose. To substantiate a technique of a choice of nominal power of power transformers for increase of their use efficiency in distributive electric networks of the cities Methods. Analytical processing of statistical data. Findings. The paper solves the problem of efficient use of the installed power of transformers, their rational choice in the design of urban electrical networks. It was found that the choice of transformers according to classical methods causes a significant error and an overestimation of the rated power at the design stage. The method of reducing this error was developed for selecting the power of transformers of urban electrical networks. This method takes into account the predicted indicators of the operating modes of the equipment, the type of consumers, the load capacity of the equipment, the parameters of the operating mode and the environment, constant heating time of existing types of transformers that can be accepted for installation, the appropriate level of reactive load compensation. Originality The scientific novelty lies in the development of the method for selecting the rated power of power transformers 6 (20) /0.4 kV urban distribution networks by comprehensive consideration of the parameters of typical consumers and their actual structure, which will effectively use transformer equipment for load capacity during the regulated period of their operation. Practical value. The obtained results show the increase in the efficiency of capital and operating costs by selecting a rational rated power of distribution transformers 6 (20) / 0.4 kV with ensuring the effective use of their load capacity in the conditions of electric grids of cities.

Highlights

  • АНАЛІЗ ДОСЛІДЖЕНЬ ТА ПУБЛІКАЦІЙЦентральне місце в структурі енергетичних об'єктів, що знаходяться на балансі та в обслуговуванні операторів систем розподілу в населених пунктах займають підстанції 10/0,4 кВ та 6/0,4 кВ та КЛ-6(10) кВ зв’язку між ними

  • Наведені у Стандарті [7], можливо використовувати: а) на етапі вибору потужності силових трансформаторів, якщо заздалегідь відомий добовий режим роботи навантаження (ГЕН) або його показники; б) у процесі експлуатації – для коригування рівня навантаження або рекомендації застосування доцільного типорозміру трансформатора В теперішній час в міських електричних мережах застосовуються переважно розподільчі трансформатори

  • The scientific novelty lies in the development of the method for selecting the rated power of power transformers 6 (20) /0.4 kV urban distribution networks by comprehensive consideration of the parameters of typical consumers and their actual structure, which will effectively use transformer equipment for load capacity during the regulated period of their operation

Read more

Summary

АНАЛІЗ ДОСЛІДЖЕНЬ ТА ПУБЛІКАЦІЙ

Центральне місце в структурі енергетичних об'єктів, що знаходяться на балансі та в обслуговуванні операторів систем розподілу в населених пунктах займають підстанції 10/0,4 кВ та 6/0,4 кВ та КЛ-6(10) кВ зв’язку між ними. Питання підвищення ефективності експлуатації силових трансформаторів міських ТП є досить важливим. У попередніх дослідженнях за даним напрямом було проаналізовано ефективність експлуатації трансформаторів районних підстанцій високовольтних електричних мереж напругою 110-220 кВ [1], розподільчих трансформаторів 6(10)/0,4 кВ [2]. В цих дослідженнях встановлено та доведено, що проблема неадекватно завищеної потужності існує, а вирішувати її необхідно, перш за все, на етапі проектування шляхом максимально можливого врахування поправкових коефіцієнтів та параметрів режимів роботи електричних мереж, технічних заходів і рішень щодо зниження розрахункового максимуму з одночасним задоволенням параметрів мережі за пропускною спроможністю. Проте доцільно визначити загальні критерії та розробити конкретні заходи щодо підвищення ефективності використання трансформаторів, що дозволить отримати уточнена методика розрахунку вибору їх потужності, а не обмежуватися загальними висновками про наявний ресурс за навантажувальною здатністю. Головна задача – це ефективне використання навантажувальної здатності та перехід до експлуатації електрообладнання у відповідності до паспортних параметрів та регламентованого строку служби

ИЗЛОЖЕНИЕ ОСНОВНОГО МАТЕРИАЛА И АНАЛИЗ ПОЛУЧЕННЫХ РЕЗУЛЬТАТОВ
ВИСНОВКИ
Methods
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call