METHOD TO DEFINE MEASUREMENT UNCERTAINTY FOR DESIGN SPACE EXPLORATION IN ADDITIVE MANUFACTURING

Abstract

AbstractAdditive manufacturing is a process used for quick prototyping in industries. Geometrical defects are observed on printed parts. The aim of the paper is to propose a design method to implement measurements uncertainties into a Design Space for Additive Manufacturing parameters selection. To do so, two tests have been realized. The first test consists in determining the instrument’s uncertainty by measuring a standard length several times by an operator. The second test aim to determine the uncertainty within operators mesurement of geometric outputs (clad’s height, clad’s width, dilution’s height, dilution’s width and contact angle). Based on the results of our tests, uncertainties have been applied in our Design Space populated with 31 real printed clads. The uncertainties display with error bars on scatterplots allow to capitalize the knowledge for his/her exploration of the Design Space for future prints. The given information provides to ease the engineer to select the optimal solution (laser power, tool speed and wire feed speed) for his/her given Additive Manufacturing problematic among candidate points