Abstract
Vanadium oxide (VOx) microbolometers enable the construction of high-performance yet low-cost and uncooled imaging detectors in the mid-infrared spectrum. Typical micro-bolometers are broadband sensors with no polarization selectivity. Thus, imaging detectors based on microbolometers have to use separate spectral and polarization filters to select the target spectral bands and polarization states, and the resulting systems are complicated and bulky. Here we demonstrate that by using metamaterial absorbers (MAs), which are arrays of optical resonators with sub-wavelength dimensions and spacing, we simultaneously tailor the VOx microbolometers' spectral and polarization responses, the need for separate spectral filters and polarizers can be mitigated. The MAs selectively absorb the TM polarization component of the incident light in a spectral band with tunable central wavelength and bandwidth while rejecting the TE polarization component. Two MAs with average TM absorption of 0.8322 in the 5.150 µm - 6.422 µm band and 0.7720 in the 5.867 µm - 7.467 µm band are fabricated, and the polarization extinction ratio (PER) are 42.24 and 42.65, respectively. The MAs are applied to VOx micro-bolometers, and the measured detector responses agree well with the absorption spectra of the MAs. The achieved peak responsivities of two fabricated detectors are 1.0 V/W at 6.0 µm and 1.46 V/W at 6.8 µm, respectively. And the two detectors achieve a D* of 6.94×105 cm·Hz1/2W-1 at 11Hz and 9.95×105 cm·Hz1/2W-1 at 36Hz, respectively. Our work paved the way towards large format room temperature multi-spectral infrared polarization imaging detector.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have