Abstract

In this research paper, an inverse double V loaded complementary square split ring resonator based double negative (DNG) metamaterial has been developed and examined numerically and experimentally. The electromagnetic (EM) properties of the proposed inverse double V-structure were calculated using computer simulation technology (CST-2019) and the finite integration technique (FIT). The designed metamaterial provides three resonance frequencies are 2.86, 5, and 8.30 GHz, covering S-, C-, and X-bands. The total size of the recommended unit cell is 8 times 8 times 1.524 mm3, and a high effective medium ratio (EMR) value of 13.11 was found from it. The − 10 dB bandwidths of this structure are 2.80 to 2.91, 4.76 to 5.17, and 8.05 to 8.42 GHz. The proposed structure's novelty is its small size, simple resonator structure, which provides double negative characteristics, high EMR, maximum coverage band, and required resonance frequencies. Wi-Fi network speeds are generally faster when frequencies in the 5 GHz band are used. Since the proposed structure provides a 5 GHz frequency band, hence the suggested metamaterial can be used in Wi-Fi for high bandwidth and high-speed applications. The marine radars operate in X-band, and weather radar works in S-band. Since the designed cell provides two more resonance frequencies, i.e., 2.86 GHz (S-band) and 8.30 GHz (X-band), the proposed metamaterial could be used in weather radar and marine radar. The design process and various parametric studies have been analyzed in this article. The equivalent circuit is authenticated using the advanced design system (ADS) software compared with CST simulated result. The surface current, E-field, and H-field distributions have also been analyzed. Different types of array structure, i.e., 1 times 2, 2 times 2, 3 times 3, 4 times 4, and 20 times 25 is examined and validated by the measured result. The simulated and measured outcome is an excellent agreement for the inverse double V loaded CSSRR unit cell and array. We showed the overall performance of the suggested structure is better than the other structures mentioned in the paper. Since the recommended metamaterial unit cell size is small, provides desired resonance frequency, gives a large frequency band and high EMR value; hence the suggested metamaterial can be highly applicable for Radar and Wi-Fi.

Highlights

  • In this research paper, an inverse double V loaded complementary square split ring resonator based double negative (DNG) metamaterial has been developed and examined numerically and experimentally

  • The MTM can be used in a variety of applications, including antenna d­ esign4,5, ­filters[6], specific

  • Cheng et al, presented a broadband MTM microwave absorber i­n27, which is an asymmetric and sectional resonator and it is applicable for energy harvesting and stealth technology

Read more

Summary

Introduction

An inverse double V loaded complementary square split ring resonator based double negative (DNG) metamaterial has been developed and examined numerically and experimentally. Faruque et al, developed a DNG metamaterial i­n32 for dual-band microwave applications, but the unit cell structure is very large 25×20 ­mm[2]. Hossain et al, developed a DNG metamaterial i­n38 for dual-band microwave applications The shape of this design is “Modified H”, and its size is 9 × 9 m­ m2. Thummaluru et al presented a tunable MTM absorber ­in[41], a wide-angle polarization controllable and circular sector This structure is applicable only for C-band and it’ size is 9×9 m­ m2. Rao et al, presented a circular-shaped metamaterial i­n42, which is applicable for multiband This MTM was utilized to increase bandwidth in a CPW fed antenna, the gain is relatively modest. The proposed inverse double V-shaped DNG metamaterial has an EMR value of 4.5, which defines smallness and appropriateness

Methods
Results
Conclusion
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call