Meso-scale numerical simulation of the mechanical behaviour of brick masonry in earth mortar

Abstract

The paper discusses the mechanical behaviour of masonry composed of fired solid bricks and earth mortar. Such masonry is a typical construction technique in South and Southeast Asia. As its mechanical behaviour is complex due to high anisotropy attributed to noticeable difference in stiffness and strength between bricks and earth mortar, it is still considered challenging to comprehend the mechanical behaviour of such masonry. Taking into account this background, the present research addresses the formulation of the mechanical behaviour of brick masonry in earth mortar. Numerical analysis was performed to reproduce uniaxial compression and diagonal compression tests, referring to empirical evidences on interface behaviour between bricks and earth mortar. Meso-scale analysis was performed, applying a multi-surface failure criterion composed of cracking, shearing and crushing to unit-joint interfaces. The analysis showed very similar stress-strain relations and failure patterns to the tests. The simulation of the uniaxial compression test presented that the distributions of compressive stress shifted along with the progress of cracks. In the reproduction of the diagonal compression test, vertical stress was irregularly distributed after diagonal stepwise cracks appeared. Two comparative studies were conducted to examine the shear performance of brick masonry in earth mortar. First, sensitivity analysis indicated the noticeable influences of compressive strength, friction angle and facture energy of unit-joint interfaces. Second, macro-scale analysis was conducted, using a homogeneous material model. The observed diagonal crack patterns were similar to the test. The paper contributes to the understanding of the mechanical behaviour of brick masonry in earth mortar.