Abstract
The objective of this study is to investigate heat transfer mechanism of pool nucleate boiling with MEMS (Micro-Electro-Mechanical systems) sensor fabricated for boiling research. Temperature variation beneath an isolated bubble under nucleate boiling condition of saturated water was measured with the sensor. Measured temperature data presents microlayer evaporation and expansion of dry-out area in bubble growth process and rewetting of the dry-out area in bubble departure process. Heat transfer from the heated surface was evaluated by calculating local heat flux by transient heat conduction simulation with the measurement data as a boundary condition. It is shown that high heat flux, induced by the microlayer evaporation, on the order of MW/m^2 was observed in the local heat flux distribution. The heat transfer enhancement by the microlayer evaporation was much larger than that by the rewetting, microlayer evaporation contributed mainly to the heat transfer from the heated surface to the boiling liquid and vapor phase. From the evaluation of the total surface heat transfer, transferred heat from the surface corresponded to about half of the latent heat of vaporization in the bubble.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series C
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.