Melt thermal-rate treatment for uniform solute distribution and improved mechanical properties of an Al-Zn-Mg-Cu alloy prepared by direct-chill casting

Abstract

Melt thermal-rate treatment (MTRT), a promising technique for improving microstructure uniformity, has been rarely applied in direct-chill (DC) casting. In this study, we investigated the effects of MTRT on the microstructure and mechanical properties of an Al-Zn-Mg-Cu alloy billet prepared using DC casting. Results indicate that MTRT improved the uniformity of solute distribution in the Al matrix, thereby enhancing mechanical properties such as hardness, tensile strength, and ductility. In particular, yield strength, ultimate tensile strength, and elongation of the near-surface region of the billet increased from 250 to 274 MPa, from 319 to 393 MPa, and from 2% to 8%, respectively. It has been reported that twinned dendrite grains (TDGs) form on the surface of billets because of directional solidification or DC casting at high cooling rates. However, this study reveals that the formation of TDGs was induced in the central region of the billet by MTRT. Furthermore, the effects of TDGs on the mechanical properties are evaluated and compared with those of regular grains of MTRT billets. Overall, these findings suggest that MTRT is an efficient technique used to improve the mechanical properties of Al alloys fabricated using DC casting.