Mechanized Welding with Metal Cored Wire

Abstract

Currently, there is a steady upward trend in the consumption of flux-cored wires in the global market of welding consumables. One of the rapidly developing technologies for the manufacture of metal structures is shielded gas arc welding with flux-cored wire with a metal core. According to the technology of use, metal cored wires do not differ from solid wires, and even surpass them in some technological characteristics. Taking into account global trends in the development of mechanized welding and the lack of domestic analogues, LLC TM.VELTEK has developed and mastered the manufacturing of high-performance metal cored wire TMB5-MK for welding in mixtures of 82% Ar + 18% CO2, 90% Ar + 10% CO2. The research aimed to study the features of the process of welding with metal cored wire compared to welding with solid wire. It has been established that metal cored wire provides high stability of arc burning in a wide range of welding modes. When welding at the same conditions in the optimal range, the index of stability of arc burning when using solid wire Sv-08G2S is 3 times lower. At the same time, the TMV5-MK wire provides a reduction in spatter losses, an increase in welding productivity and high mechanical properties of the weld metal. It is shown that the stability of the welding process is significantly affected by the electrodynamic properties of the power source and this factor must be taken into account when evaluating the welding and technological properties of welding wires and developing recommendations for their use.