Abstract
Abstract The aim of this study is to demonstrate the transformation of grade-A steel into dual-phase steel by heat treatment, and the joint performance of dual-phase steels welded by means of the gas metal arc welding process using both solid and flux-cored welding wires. Dual-phase steels with different contents of martensite were obtained by intercritical annealing in different temperature ranges of a grade-A shipbuilding steel, followed by water quenching. The experimental results revealed that the tensile strength of the dual-phase steels joined by solid wire is higher than that of the flux-cored wire joints. The microstructure of grade-A steel consists of ferrite and pearlite, while the dual-phase steels consist of ferrite and martensite. On the other hand, while the martensitic phase is especially encountered in the weld metal of the dual-phase steels joined with the solid wire, the ferrite phase is more common in the weld metal of the flux-cored wire joints.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
