Mechanistic analysis of hydrogen-rich Co-gasification of pine wood and polypropylene-based waste masks using Fe/Dol catalyst

Abstract

Disposable masks, predominantly made of polypropylene melt-blown fabric, present a significant environmental challenge due to their large volume and resistance to natural degradation. This study explores the co-gasification of forestry waste, specifically pine wood, and waste masks to enhance biomass gasification efficiency while enabling the high-value utilization of waste materials. The Fe/Dol catalyst, prepared by loading transition metal Fe onto calcined dolomite using the impregnation method, was tested in a two-stage fixed-bed gasification system. Steam was employed as the gasifying agent. The study systematically examines the effects of steam flow rate, gasification reforming temperature, the mixing ratio of pine wood to masks, and Fe loading on the catalyst's performance in gas-phase and liquid-phase product formation.Characterization analyses revealed that Fe oxides facilitate the cleavage of aromatic rings in aromatic compounds, leading to the formation of two-carbon chain segments and promoting the production of ethylene and propylene from aliphatic hydrocarbons. Additionally, the catalyst enhanced tar cracking, generating free radicals and ring bonds. Experimental results indicate that at a steam flow rate of 3 mg/min, a gasification temperature of 850 °C, a pine wood to mask mixing ratio of 1:2, and an Fe loading of 8 %, the hydrogen (H2) volume fraction reached 52.48 %, with a gas yield of 1.67 m³/kg and a hydrogen production rate of 78.25 g/kg.