Abstract
The conditions of deposition of alumina and metal on ZrO2-CaO-C refractory have been investigated in comparison with Al2O3-C refractory by laboratory scale test. The results are summarized as follows: (1) When aluminum content is low, or amount of alumina inclusions are little, ZCG refractory is more hardly to be deposited than AG, as is reported before. On the contrary, ZrO2-CaO-C refractory was more easily deposited than AG in the case of some level of aluminum content and non-metallic inclusions. (2) The deposition may be composed of two steps. The first is the formation of a fine oxide layer (the network alumina) in the hot face during the very short time after immersion. The second is the deposition of non-metallic inclusions on the fine oxide layer. (3) The generation mechanism of the fine oxide layer is due to the reaction between aluminum in the molten steel and the next substances. (1): SiO2 in the refractory, (2): SiO cand CO gases generated by the reaction between SiO2 and graphite in the refractory, (3): ZrO2 in the refractory. Concerning to ZrO and CO gases generated by the reaction between ZrO2 and graphite in the refractory, more detail study is necessary to clarify the contribution to the reaction.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
