Abstract
The stability of droplet transfer plays an important role in the weld formation and spatters suppression during the laser-MIG hybrid welding. However, a debate exists on whether increased laser power improves or suppresses the droplet transfer. In this study, the role of laser heat source was investigated in a wide range of laser power. The transfer frequency was firstly improved by increasing laser power, and then it was decreased once the laser power proceeded a critical value. The variation of droplet transfer frequency was determined by the competition between electromagnetic force and metal vapor reaction force. With increasing laser power, the arc conductivity was better and the arc current was improved, leading to increase of the electromagnetic force. As a result, the droplet transfer was promoted and the deposition rate of wire metal was increased. However, rapid increase of metal vapor reaction force was obtained when the laser power exceeded the critical value, producing a greater resistance on droplet transfer. Furthermore, the critical value of laser power was mainly determined by the characteristics of laser source, materials, laser focusing distance and laser-arc distance. This work will provide more guidance on matching processing parameters of the laser-MIG hybrid welding to improve weld formation and suppress spatters by stabilizing the droplet transfer.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
