Mechanical response in tension of twin-induced Mg alloys in wide strain rate regimes

Abstract

Effect of twin boundary with/without segregation of solute atoms on deformation behavior in tension is examined in Mg–3Al–1Zn (AZ31) alloys from low strain rates to high strain rates. Solute atoms (Al and/or Zn atoms) are segregated at {10 1‾ 2} twin boundaries by static annealing at a temperature of 423 K with a holding time of 150 min. The room-temperature tensile mechanical response of the specimens, which have pre-induced twin boundaries, shows detwinning behavior, regardless of the strain rate between 10−5/s and 100/s. The yield strength of these specimens is also unlikely to be affected by strain rate, because twin boundary mobility, i.e., the shrinkage, is an athermal process. On the other hand, the specimen with segregating of solute atoms at twin boundaries exhibits an increased strength and a decreased strain hardening as compared with those in the specimen having non-segregated twin boundaries. Newly formed deformation twins of several types, i.e., the {10 1‾ 2} twins, {101‾ 1} twins and {101‾ 2}-{101‾ 1} double twins, are the origin of fracture in these specimens.