Mechanical properties of ZrB2- and HfB2-based ultra-high temperature ceramics fabricated by spark plasma sintering

Abstract

Abstract Flexural strengths at room temperature, at 1400 °C in air and at room temperature after 1 h oxidation at 1400 °C were determined for ZrB 2 - and HfB 2 -based ultra-high temperature ceramics (UHTCs). Defects caused by electrical discharge machining (EDM) lowered measured strengths significantly and were used to calculate fracture toughness via a fracture mechanics approach. ZrB 2 with 20 vol.% SiC had room temperature strength of 700 ± 90 MPa, fracture toughness of 6.4 ± 0.6 MPa, Vickers hardness at 9.8 N load of 21.1 ± 0.6 GPa, 1400 °C strength of 400 ± 30 MPa and room temperature strength after 1 h oxidation at 1400 °C of 678 ± 15 MPa with an oxide layer thickness of 45 ± 5 μm. HfB 2 with 20 vol.% SiC showed room temperature strength of 620 ± 50 MPa, fracture toughness of 5.0 ± 0.4 MPa, Vickers hardness at 9.8 N load of 27.0 ± 0.6 GPa, 1400 °C strength of 590 ± 150 MPa and room temperature strength after 1 h oxidation at 1400 °C of 660 ± 25 MPa with an oxide layer thickness of 12 ± 1 μm. 2 wt.% La 2 O 3 addition to UHTCs slightly reduced mechanical performance while increasing tolerance to property degradation after oxidation and effectively aided internal stress relaxation during spark plasma sintering (SPS) cooling, as quantified by X-ray diffraction (XRD). Slow crack growth was suggested as the failure mechanism at high temperatures as a consequence of sharp cracks formation during oxidation.