Mechanical properties of wood treated with PF-pyrolytic oil resins

Abstract

Jack pine and sugar maple wood samples were treated in a two-step process that involved first a copper chloride or a copper chloride-sodium borate mixture and then a phenol-formaldehyde resin containing a certain percentage of softwood bark pyrolytic oil. Various controls were also prepared for comparison. The modulus of rupture (MOR) of jack pine samples was generally negatively affected by the treatment, the observed values being lower than those of the controls. These values were statistically lower or equal to those of untreated samples. On the other hand, the modulus of elasticity (MOE) of treated jack pine samples was not found to be statistically different from that of the untreated wood. Mechanical properties behaved in a similar way for sugar maple wood. Unlike the other treatments, copper chloride–sodium borate and the resin containing 85% of pyrolytic oil as phenol substitute appeared to slightly improve the mechanical properties of both wood species even if not significantly so. Treatment with PF-pyrolytic oil resin resulted in similar or slightly better mechanical properties when compared to CCA-treated wood. The amount of treating water soluble salts retained in samples after the first treatment had a significant impact on MOR of both wood species and on MOE of sugar maple.