Abstract

GF reinforced polymer composites to improve the mechanical properties by increasing fiber content, but there is a limit. On the contrary, CF reinforced polymer composites are superior to the GF composites at a lower CF content in tensile and bending properties. However, CF is more expensive than GF. In this study, acrylonitrile butadiene styrene (ABS) was reinforced with single and hybrid reinforcing of glass fibers (GF) and carbon fibers (CF). The composites consisting of GF/ABS, CF/ABS and GF/CF/ABS were fabricated by direct fiber feeding injection molding (DFFIM). The reinforcing fiber was directly fed at the vent hole of the barrel in the DFFIM process. The effects of fiber Tex, fiber numbers and processing parameters on properties of the composites were investigated. Tensile, bending and Izod impact testing was conducted to compare mechanical properties of GF/ABS composites, CF/ABS composites and hybrid GF/CF/ABS composites. Morphology of the composites was observed by scanning electron microscopy. In addition, the cost advantage of each composite was compared with their mechanical properties. From the results, the addition of carbon fiber improved tensile, bending and impact properties of the hybrid composites. SEM photographs indicated that carbon fiber tended to agglomerate during the DFFIM process. The hybrid GF/CF/ABS composites presented an equivalent improvement in tensile and bending properties as compared to the CF/ABS composites. It can be noted that the low CF content was suitable for enhanced mechanical performances of the hybrid GF/CF/ABS composites. Therefore, the hybrid composites can be manufactured at a low cost as compared to the similar mechanical properties of the CF/ABS composites.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.