Mechanical properties: Lifespan and retention forecast for jute fiber woven fabric reinforced epoxy matrix composite

Abstract

AbstractPolymer composites bonded with natural fibers are extensively used for a range of engineering purposes. Preserving their mechanical strength and estimating their maximum service life are thus essential for efficient usage. The primary goals of this effort are to analyze and forecast the longest possible life span of composites. To do this, Fick's law and the Arrhenius principle are employed to analyze the diffusion coefficient and activation energy. Compression molding technology and a manual technique for layup were employed to make the composites reinforced with epoxy laminate and woven mats of jute fiber (JRC). Three layering patterns were used to prepare the laminated composite: 45° angle‐ply laminate [0°/+45°/0°/−45°/0°], 0° balanced laminate [0°/0°/0°/0°/0°/0°], and 30° angle‐ply laminate [0°/+30°/0°/−30°/0°]. In order to examine how aging affected the composites' mechanical properties, the materials were immersed in water for 10, 20, 30, and 40 days throughout the study. The study's conclusions showed that the composite samples' weight rose with age. It was possible to make precise predictions about strength retention by comparing the mechanical characteristics of aged (wet) and unaged composites. It was discovered that the strongest composites were those with a 45‐degree stacking pattern. The activation energy of composites with a 45° angle‐ply laminate layering pattern is maximum, according to the Arrhenius principle. Additionally, using an electron microscope with scanning capabilities (SEM), it was possible to determine the fiber matrix and the tensile cracked surface contact connection.Highlights The widespread usage of polymer composites with natural fibers in engineering applications. Preservation of mechanical strength and predicting the maximum service life of these composites show how important these materials are for engineering efficiency. Fick's rule and the Arrhenius principle are used to analyze diffusion coefficient and activation energy. Laminated composites are made using 45° angle‐ply, 0° balanced laminate, and 30° angle‐ply layering patterns. The impact of simulated aging on composite mechanical characteristics by water immersion for varied periods.