Abstract
Composites composed of the mixed fibers of L-lactide (LA) grafted sisal fiber (SF-g-LA) and untreated sisal fiber (USF) in a poly (lactic acid) (PLA) matrix were prepared with SF-g-LA/USF fibers ratios of 0, 1:9, 3:7, 5:5, 7:3, 9:1, and 1. The mechanical properties and the interfacial performance of the mixed SF reinforced PLA composites were investigated. The results of the study showed that the introduction of SF-g-LA improved the tensile strength, tensile modulus, flexural strength and flexural modulus of the mixed SF reinforced PLA composites compared with pure PLA or PLA composites with only USF, resulting from the improved interfacial adhesion between SF-g-LA and the PLA matrix. In addition, the introduction of some amount of USF enhanced the reinforcing efficiency of the mixed SF in the composites compared to the PLA composites with only SF-g-LA, owing to the good mechanical properties of USF itself. Furthermore, as for the tensile strength and tensile modulus of the mixed SF reinforced PLA composites, the optimal ratio of SF-g-LA and USF was 7:3, whereas for the flexural modulus of the mixed SF reinforced PLA composites, the optimal mixed ratio of SF-g-LA and USF was 3:7.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
