Abstract
The main aim of this work is to manufacture a composite material based on a natural material (marble) with acceptable mechanical properties and fire resistance, for being used in habitat industry as floor or wall in buildings. Marble used as raw material is the waste powder of quarry or plate manufacturing. To achieve this objective, polyester matrix composites with 50 wt.% of marble and 3 wt.% of glass fiber (short fiber or mesh) were prepared. The novelty of this study is the high percentage of ceramic material added to a polymer matrix composite and the fire resistance study. Samples were characterized mechanically through flexural test, Charpy impact test, compression test and wear resistance by pin-on-disk test. Fracture surfaces were analyzed by scanning electron microscope (SEM), and wear tracks were studied by SEM and 3D optical profilometer. Besides, samples were subjected to fire test using a Bunsen burner at 900 °C for 20 min. Sample temperature at the opposite-to-fire test side was measured with an infrared thermometer. Results show that marble improves mechanical properties of polyester and the effect of the glass fiber depends on its morphology (fiber or mesh). Fire resistance is high, and the fire goes out when the flame is turned off. Furthermore, the mesh maintains the integrity of the sample.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.