Abstract
This study presents the mechanical performance of marine concrete filled carbon fiber reinforced polymer (CFRP)-Aluminum alloy tube columns (CFRP-CFAT) through axial compression experiment and finite element analysis. 18 specimens were tested including 3 marine concrete filled aluminum alloy tubes (CFAT) and 15 CFRP-CFATs. The effects of the CFRP pasting position (outer and inner CFRP) and the number of CFRP layers were investigated. The typical failure pattern of specimens without inner CFRP was waist drum failure of aluminum alloy tube and concrete crushed, aluminum tube and concrete of specimens with inner CFRP were shear failure, the CFRP of all specimens was fractured. CFRP and aluminum alloy tube have fine deformation coordination performance. With the confinement of CFRP, the ultimate bearing capacity and energy absorption capacity of CFRP-CFATs were increased by up to 60.0% and 37.3%, respectively, also effectively inhibited the damage development of specimens. Moreover, a finite element model was developed, a parametric study was carried and a model for calculating the ultimate bearing capacity of CFRP-CFAT was proposed. The simulated results and calculated results were consistent with experimental results.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
