Abstract
Aiming at the problem of the detect and rescue in the coal mine with the leaking vas, a type of pneumatic hexapod explored robot which uses a high pressure nitrogen cylinder as the power producer is designed. The leg mechanism is designed with three degrees of freedom, the straight line walking and turning gaits are planned, which are testified by the virtual prototype. The control loop of the cylinder is designed with the magnetic valve with three positions and five paths. The air bottle, the reducing valve, the general follow control part (GFC) the magnetic valve with three positions and five paths, the cylinder are selected and the air supply loop of the hole machine is designed, the 3D model of the hole machine is built which is used to confirm the installing form of the hole body. The experimental prototype is obtained at last. The power supply and control circuits of the magnetic valves are designed, the control series is written on the Arduino single chip. The experiment of the leg swing of the robot on the stage is proceeded which verifies the correctness of the design.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.