Mechanical Behaviour of 7075-T6 Aluminium Alloy: Integrating Digital Image Correlation and Finite Element Analysis for Uniaxial and Biaxial Load Scenarios

Abstract

The objective of this study is to investigate the mechanical properties of 7075-T6 Aluminium (Al) alloy under both uniaxial and biaxial loads. The study will be conducted using a combination of experimental and numerical methods. The experimental method used is the digital image correlation (DIC) technique, which was utilized to capture the deformation and strain fields of the material specimen under tensile test. A tensile machine was employed to apply uniaxial and biaxial loads on the sample. The strain and deformation distribution of the results was generated on the DIC and correlated software. The numerical method involved the use of a commercial finite element software to create a finite element model and simulate the mechanical behaviour of the material under the same loading conditions. The results obtained from the experimental and numerical methods were compared to validate the accuracy of the numerical model. The outcomes demonstrated that under uniaxial loading, localized necking and fracture were observed, while biaxial loading resulted in shear deformation and fracture. This research contributes to the development of more accurate models for predicting the mechanical behaviour of the model samples under different loading conditions.