Abstract
Sandwich panels manufactured using thermoplastic fiber-metal laminates (FML) skins and an aluminum foam core were tested under quasi-static and low-velocity impact loading conditions. The quasi-static properties of the sandwich beams were evaluated using the three-point bend test geometry. Energy absorbing mechanisms such as buckling and interfacial delamination in the FML skin, as well as indentation, crushing, and densification in the aluminum foam have been observed to contribute to the excellent energy absorbing characteristics offered by these systems. The low-velocity impact behavior of the sandwich panels was evaluated using an instrumented dropping weight impact tower and modeled using an energy balance approach. A breakdown of the energy absorption revealed that these sandwich structures absorb much of the impact energy due to contact and bending effects. Finally, four-point bend testing after low-velocity impact revealed that these systems offer excellent residual flexural strength with relative values remaining close to 80% of the original strength after a 32 J impact.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.