Abstract
Abstract The differences between mechanical properties and acoustic emission (AE) and electromagnetic radiation (EMR) characteristics of natural coal samples and saturated coal samples were analyzed by performing indirect tensile experiments. The experimental results show that coal samples go through four stages: compaction, elastic deformation, plastic deformation and failure. There is good correspondence between AE and EMR signals and the damage to coal samples. Under the action of water, tension strength of samples is reduced, while the plasticity is enhanced; also, the softening coefficient of tensile strength becomes 0.65. The saturated coal samples have a longer plastic stage and a more obvious AE quiet period. The damage to natural coal samples is tension damage, while that of saturated coal samples is due to tension and shear damage, which is more sufficient and irregular. EMR is still remarkable when AE is in a quiet period, and EMR is better for the precursor of rupture. Water weakens the generation and propagation of AE and EMR signals, especially in the earlier stage. AE and EMR damage factor D, defined by AE and EMR counts, has a better description of the damage degree in the indirect tensile process. This study is of great significance for research on the damage mechanism of water-bearing coal, the stability monitoring of water-bearing coals in the actual engineering process and the effect evaluation of hydraulic flushing.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
