Mechanical and microstructural characterization of sustainable concrete containing recycled concrete and waste rubber tire fiber

Abstract

The production of cement, which is the key ingredient of concrete, leads to environmental pollution by releasing massive amounts of CO2 and using significant natural resources. Therefore, shifting towards sustainable and greener materials is essential for mitigating these challenges. In this study, recycled concrete powder (RCP) was used as a cement replacement (0%, 5.0%, 10%, and 15%), solving the waste dumps issue and promoting sustainability. Furthermore, the concrete is also reinforced with steel fibers which were obtained from waste rubber tires to improve concrete tensile strength. The concrete properties were evaluated through slump cone test, compressive strength, failure patterns, tensile strength, scanning electronic microscopy, and FTIR analysis. The results indicate that the concrete strength properties improved with the substitution of RCP. The compressive and tensile strength of the optimum mix (10% RCP and 2.0% addition of steel fibers) are 15.8% and 23% more than those of reference concrete. However, the concrete flow is adversely impacted due to RCP angular particle shapes. Failure patterns indicate that RCP and steel fibers improved concrete ductility. SEM and FTIR analysis indicate microstructural improvement with RCP and steel fibers. Finally, the analysis concluded that the developed concrete showed better performance, solved waste dumps issues, and promoted sustainability.