Abstract
Bimetal composite pipe are widely used in petrochemical industry and other industries due to its good mechanical properties and corrosion resistance. In this paper, the minimum radial rotary pressure (Pimin) and maximum radial rotary pressure (Pimax) were obtained by theoretical mechanical calculation, so as to optimize the design of the spinning device. The residual contact pressure was acquired to evaluate the forming quality of the composite pipe. It was found that when the spinning parameters (δ = 0.16 mm, ψ = 0.4 mm, β = 3.0° and f = 0.5), the maximum residual contact pressure was obtained, and the simulated and experimental values were 9.19 MPa and 9.01 MPa, respectively. They were close to the theoretical value (9.67 MPa), and the error of these values was about 9%, which proved the accuracy of the theoretical analysis.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.