Abstract
A finite element (FE) model and a boundary element (BE) model have been developed to predict the decay rate, vibration and noise responses of an embedded rail track. These models are validated using measured results. The optimisation of the embedded rail track is conducted using these calculated models. The results indicate that the optimised cross-section of the gutter for the embedding rail can significantly reduce the radiated noise of the embedded rail track. The embedded rail track using the I-shaped cross-section gutter reduces the radiated noise of the track by at least by 3dB(A). Furthermore, combining the material parameter optimisation with the gutter cross-section optimisation can further reduce the radiated noise of the embedded rail track. Increasing the Young’s modulus of the rail pad in the embedded rail track with the I-shaped cross-section gutter can result in a radiated noise reduction of 4dB(A).
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
