Abstract

Recently, biodiesel has received tremendous attention from a lot of scientists as a biodegradable, renewable and high-potential fuel which could be used directly or blended with diesel in internal combustion engines. The adequate thermophysics properties of fuel are required to model the process of fuel spray, atomization and combustion accurately. In this work, three fuel blends containing methyl laurate and n-undecane, n-dodecane, n-tridecane were prepared and an important transport property—liquid thermal conductivity of which were measured by the transient hot wire method system. The measurement was conducted at temperature ranging from 292 K to 362 K at atmospheric pressure with the mass fraction of methyl laurate being nearly 0.2000, 0.4000, 0.6000 and 0.8000 (by weight) in the binary mixtures. Furthermore, the relationship between the experimental results and temperature and concentration of methyl laurate were correlated as a function. The uncertainty of the experimental system is less than ±2.0%.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.