Abstract
AbstractThe band alignment of SiO2 and GaN is important for passivation of high voltage devices and for gate insulator applications. In this study XPS and UPS techniques are employed to determine the electronic states as SiO2 is deposited onto a clean GaN surface. The substrate was epitaxially grown n-type GaN on 6H-SiC (0001) substrates with an AlN (0001) buffer layer. The GaN surface was atomically cleaned via a 860°C anneal in an NH3 atmosphere. For the clean GaN surface, upward band bending of ~0.3 ±0.1 eV was measured, and the electron affinity was measured to be ~2.9 eV. Layers of Si were deposited on the GaN surface via Molecular Beam Epitaxy (MBE), and the Si was oxidized by a remote O2 plasma. The oxidation of the Si occurred without oxidizing the GaN. Densification of the created SiO2 film was achieved by annealing the substrate at 650°C. Surface analysis techniques were performed after each process, and yielded a valence band offset of ~2.0 eV, and a conduction band offset of ~3.6 eV for the GaN-SiO2 interface.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.