Abstract
The ultimate goal of this work is to accurately predict the resonance frequencies of large (on the order of 10 cm radius) encapsulated bubbles used in an underwater noise abatement system, and also to investigate ways to enhance the system's efficacy over the use of air-filled bubbles alone. Toward that end, a closed water-filled tank was developed for the purpose of measuring the resonance frequency and damping of single large tethered encapsulated bubbles. The tank was designed to be operated in the long wavelength limit for frequencies below the lowest tank resonance, which was near 350 Hz, using the method described by Leighton, et al. [J. Acoust. Soc. Am.112, 1366-1376 (2002)]. Individual bubble resonance frequencies and quality factors were measured for encapsulated bubbles of various sizes. The effects of the encapsulating material and wall thickness were investigated, along with the effects of alternative fill gases and internal heat transfer materials. The experimental results were compared with an existing predictive model [J. Acoust. Soc. Am. 97, 1510-1521 (1995)] of bubble resonance and damping.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
