Measurement of the Acoustic Relaxation Absorption Spectrum of CO2 Using a Distributed Bragg Reflector Fiber Laser

Abstract

Reconstruction of the acoustic relaxation absorption curve is a powerful approach to ultrasonic gas sensing, but it requires knowledge of a series of ultrasonic absorptions at various frequencies around the effective relaxation frequency. An ultrasonic transducer is the most widely deployed sensor for ultrasonic wave propagation measurement and works only at a fixed frequency or in a specific environment like water, so a large number of ultrasonic transducers operating at various frequencies are required to recover an acoustic absorption curve with a relative large bandwidth, which cannot suit large-scale practical applications. This paper proposes a wideband ultrasonic sensor using a distributed Bragg reflector (DBR) fiber laser for gas concentration detection through acoustic relaxation absorption curve reconstruction. With a relative wide and flat frequency response, the DBR fiber laser sensor measures and restores a full acoustic relaxation absorption spectrum of CO2 using a decompression gas chamber between 0.1 and 1 atm to accommodate the main molecular relaxation processes, and interrogates with a non-equilibrium Mach-Zehnder interferometer (NE-MZI) to gain a sound pressure sensitivity of −45.4 dB. The measurement error of the acoustic relaxation absorption spectrum is less than 1.32%.