Abstract

AbstractFor measurement of water content using TDR, parallel wire transmission lines varying in length from 0.125 to 1 m were installed vertically at planting time at three sites in a corn field. At one of the sites horizontal lines and additional vertical transmission lines with electrical impedance discontinuities were installed for comparison. Measurements of water content using a portable TDR cable tester were made periodically during the growing season. Comparisons of water contents by TDR with those from gravimetric samples showed that generally both were the same values. Standard deviations of differences between TDR and gravimetric values were ± 0.02 m3m−3 when measured locations were the same but increased to ± 0.06 m3m−3 when measured locations were different. Repeated measurements at the same location were highly correlated, one with another, over the season. Analysis of variance showed that all transmission line types were yielding equivalent values and that the horizontal transmission lines gave the minimum standard error of the mean. Data from transmission lines with impedance discontinuities gave water content profiles from a single measurement but the analyses of the TDR data curves were more complex than for the lines without impedance discontinuities. The variety of transmission line configurations for use in TDR measurement allows considerable flexibility of choice in relation to one's application.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.