Measurement of Differential Hardening under Biaxial Stress of Pure Titanium Sheet

Abstract

Biaxial stress tests of a commercially pure titanium sheet (JIS #1) using the cruciform specimen and the servo-controlled biaxial testing machine have been carried out in order to elucidate its anisotropic plastic deformation behavior. The geometry of the cruciform specimen is identical to that regulated by the ISO 16842. Nine linear stress paths, σx (rolling direction): σy (transverse direction) = 1:0, 4:1, 2:1, 4:3, 1:1, 3:4, 1:2, 1:4, and 0:1 in the first quadrant of the principal stress space are applied to the cruciform specimens. Contours of plastic work in the principal stress space and the directions of plastic strain rates at selected levels of plastic work have been precisely measured. The range of the equivalent plastic strain applied to the specimens is 0.002 ≤ ≤ 0.01. The shapes of the work contours significantly change with increasing the test material exhibits differential hardening (DH). Using the data of the work contours and the directions of plastic strain rates, the applicability of selected anisotropic yield functions to the accurate prediction of the plastic deformation behavior of the test material is examined.