Abstract
Hot stamping process has been developed to produce the steel automobile parts with an ultra-high-strength of 1500 MPa. The effect of scale thickness on the formability in hot stamping was investigated by a hot deep drawing test in our previous research. The draw-in lengths of flange increased with decreasing the scale thickness. It is supposed that thin scale thickness resulted in low coefficient of friction at the flange area. The other reason is the temperature of wall zone would become low according to decreasing the scale thickness or increasing of the thermal transfer coefficient and it slightly inhibits local deformation at the wall area. It is difficult to separate these phenomena. To quantify the effect of scale thickness on the friction at the flange area during hot deep drawing, the coefficient of friction was directly measured. The coefficient of friction decreases with decreasing scale thickness.
Sign-in/Register to access full text options 
Free) 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call
