Abstract
Micro- and meso-porous materials such as zeolites, metal-organic frameworks (MOFs), covalent-organic frameworks (COFs), zeolitic imidazolate frameworks (ZIFs), Vycor glass, MCM-41, and SBA-15 are used in membrane separation in a wide variety of applications such as CO 2 capture. For process development and design purposes the Maxwell–Stefan (M–S) equations are widely used for modeling mixed gas permeation. In the M–S formulation we have basically two types of diffusivities: (a) Ð i , that characterize species i–wall interactions in the broadest sense and (b) exchange coefficients Ð ij that reflect how the facility for transport of species i correlates with that of species j. Such correlations have the effect of slowing-down the more mobile partner species in the mixtures. In many cases the Ð i corresponds to the value of the pure component i; consequently these can be estimated from unary permeation data. The Ð ij , on the other hand are not directly accessible from experimental data. The major objective of this communication is to stress the importance of proper estimation of the exchange coefficients Ð ij . To achieve this objective, and to illustrate the variety of issues involved, we consider permeation of CO 2/H 2, CO 2/N 2, CO 2/CH 4, and CH 4/H 2 mixtures across membranes with crystalline layers of four different materials: MFI (intersecting channels of 5.5 Å size), BTP-COF (one-dimensional hexagonal-shaped channels of 34 Å), LTA-Si zeolite (11.2 Å cages separated by 4.11 Å × 4.47 Å sized windows), and MgMOF-74 (1D hexagonal-shaped channels of 10.4 Å size). The required data on pure component adsorption isotherms are obtained from configurational-bias Monte Carlo (CBMC) simulations. The M–S diffusivities are determined from molecular dynamics (MD) simulations. Our studies show that the permeation selectivities are crucially dependent on the proper modeling of the correlation effects. Increased upstream feed pressures lead to significant enhancement in permeation selectivities; this enhancement is directly traceable to the increase of the correlation effects with increased loadings. Use of some commonly used approaches, suggested in the published literature, lead to severe underestimation of permeation selectivities.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.