Abstract

This study aimed to maximise the amount of CO2 storage by indirect carbonation using paper sludge ash (PSA), which is an alkaline industrial waste. The properties of the following three types of solvents were considered: acids (acetic acid and hydrochloric acid), ammonium salts (ammonium chloride and ammonium acetate) and others (sodium citrate and water). When carbon dioxide was injected into calcium leachates prepared from PSA using acids, carbonation did not occur, and using ammonium salts as solvent, the carbonation efficiency was low. However, after pH swing of the leachates using sodium hydroxide and ammonia solution for acid and ammonium salt solvents, up to 324kgCO2/(ton PSA) and 175kgCO2/(ton PSA) were stored, respectively. When carbon dioxide was injected into calcium leachates prepared from PSA using sodium citrate or water, solid was initially generated which later dissolved. In order to solve this problem, CO2 injection was stopped just before the pH of the solution reached 10.5 for sodium citrate and 8.3 for water, resulting in the storage of 136kgCO2/(ton PSA) and 29kgCO2/(ton PSA), respectively. Solids obtained through carbonation were pure calcium carbonate.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call