Abstract
In this paper, a mini-channel PV/T and mini-channel thermal panel hot water system is presented. The thermal panels in this system use mini-channel tube as the heat exchanger, which has a small hydraulic diameter and large heat exchanger area, and this special structure can improve the heat transfer coefficient at the same flow rate than the conventional type. The performance of this system for generating hot water and electricity in summer has been tested, and a simulation model of this operating mode has been developed. Based on a typical day’s weather data, the simulation model is verified, and the experimental and simulated results agree with each other very well. The results reveal that the experimental and simulated electrical efficiencies of PV/T panels are 11.5% and 12.6%, respectively. The experimental and simulated thermal efficiencies of thermal collectors are 46.8% and 48.0%, respectively. The experimental and simulated final water temperatures in the tank are 59.3 °C and 60.9 °C, respectively. Based on these results, an error analysis is carried out. The experimental and simulation results of the system in summer provide a fundamental data and method for predicting the annual performance of the system in the future.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
