Abstract
The present paper is studied the mathematical and artificial neural network (ANN) model in electrical discharge deposition of magnesium alloy. Surface coating is covering the workpiece surface with desired coating materials to improve the surface properties. Electrical discharge coating (EDC) is an electro thermal process, used for creating hard coating over the workpiece. In this present study, magnesium alloy is deposited using WC-Cu composite electrode by EDC. RSM is used to develop design matrix for carrying out EDC experiments. Compaction load, discharge current and pulse on time are controlled, whereas material deposition rate (MDR) and surface roughness (SR) are measured as response. The objective of this investigation is to predict the MDR and SR using neural network technique. ANN model developed by back propagation algorithm is proposed in this study for predicting the responses. ANOVA is conducted to identify the dominating parameter, which significantly affects the responses. Correlation coefficient between the ANN and RSM is 0.99, which is close to the unity for ANN. It was revealed that the prediction of proposed ANN was found to be excellent to the RSM model. MDR increased with increasing discharge current and pulse on time. SR decreased with increasing compaction load.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.