Abstract
The current optical photolithography technology is approaching the physical barrier to the minimum achievable feature size. To produce smaller devices, new resolution enhancement technologies must be developed. Double-exposure lithography has shown promise as a potential pathway that is attractive because it is much cheaper than double-patterning lithography and can be deployed on existing imaging tools. However, this technology is not possible without the development of new materials with nonlinear response to exposure dose. The performance of existing materials such as reversible contrast enhancement layers (rCELs), and theoretical materials such as intermediate state two-photon (ISTP) and optical threshold layer (OTL) materials in double-exposure applications have been investigated through computer simulation. All three materials yielded process windows in double-exposure mode. OTL materials showed the largest process window (depth of focus (DOF) 0.14 µm, exposure latitude (EL) 5.1%). ISTP materials had the next-largest process window (DOF 0.12 µm, EL 3.2%), followed by the rCEL (0.11 µm, 0.58%). This study is an analysis of the feasibility of using the materials in double-exposure mode.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.